Skip to main content

Hand firing rockets

Have you ever seen someone launching a fireworks rocket directly through their hands? This is the way we tradittionally launch rockets in my country - Portugal! This is a technique not only used in Portugal, but also in Spain and some Latin-America countries.

The pyrotechnician holds the rocket with one hand and lights it with the other using a slow burning cotton cord or even a cigarette and that's it, let it go! Obviously this is a dangerous operation, but it is used for centuries and rarely accidents occur mainly because our rockets are well made, taking all the care to avoid injuries. By the operator, a crucial step is to let the rocket go, without trying to move it (or help it rise, it really doesn't need that).

Usually, during shows or events where a lot of rockets must be lauched, there are two operators - one to light the rockets and another to help giving the rockets.

Hand firing fireworks is allways exciting because you can feel the power near you. You must know the products and their origin and never trust 100% - remember the overcondidence is allways one of the most dangerous pitfalls in this job.

There is also a very traditional way of hand firing shells in Japan, please take a look at this other post.

After read the this post and the other in the link above, please tell us what you like the most (rockets or shells) here.

Comments

Popular posts from this blog

Heavy smoke in Copacabana Fireworks Show

Copacabana, Rio de Janeiro, Brazil is famous for it's huge and beautiful fireworks show every year. But last New Years Eve (2024 - 2025), many viewers were disappointed with the show because of a heavy smoke cloud that overshadowed the beauty of the spectacle right after the first 2 minutes. But what was the reason of so much smoke? We all know that almost any kind of firework cause lots of smoke. Many people think the problem was caused by the quality of the products, but the main reason for that was probably the high humidity rate. In Rio de Janeiro, the highest humidity rates occur between december and april. According to INMET (National Institute of Meteorology), the humidity at the moment of the show was around 89% , so this, along with an unfavorable wind, was the main reason for the problem. Below is a picture of the beautiful start of the show: But unfortunately some minutes later: Anyway, with lots of smoke or not, for us that love fireworks it's a...

Japanese vs Chinese Fireworks: A Tale of Two Traditions

The fireworks industries of Japan and China represent two distinct approaches to pyrotechnics, shaped by centuries of cultural heritage, technological innovation, and market dynamics. Historical Origins China is widely recognized as the birthplace of fireworks, with a history dating back to the Tang Dynasty (618-907 AD). In contrast, Japan adopted fireworks later, primarily during the Edo period (1603-1867), developing a unique aesthetic and technological approach. Manufacturing Approaches Chinese Fireworks Industry Dominates global production, accounting for approximately 90% of world fireworks manufacturing Characterized by large-scale, low-cost production Massive industrial clusters in provinces like Hunan and Guangdong Strong export-oriented manufacturing model Focuses on volume and economic efficiency Japanese Fireworks Industry Emphasizes precision, artistic quality, and aesthetic design Smaller-scale production with high-value specialty prod...

Double Voice Cracker

These days I watched a video of a strange fireworks device I have never seen and discovered it's name is " Double Voice Cracker ". Today I will tell you what I have learned about it. Also known as Heaven and Earth or Bing Bong , Double Voice Crackers are a chinese type of firecracker that essentially produces 2 bangs, one in the ground an another in the air. It is like a mortar and shell self contained in a single tube divided in the middle by a clay (or other hard material) plug with a timing fuse. Below is a diagram of a Double Voice Cracker from the book " The Best of AFN II ": Before igniting the fuse, the device must be placed over a hard and flat surface with the lifting charge facing the ground. When the fuse is ignited, the lifting charge explodes and kicks the tube into the air, while igniting the time fuse and finally the report charge explodes in the air. The report charge could be flash powder or any other effect. For more safety ...